Williams Sound Stereo Receiver WIR SYS 90V User Manual

SoundPlus® Infrared System • Model WIR SYS 90V  
D
D
Description:  
The TX90 two channel IR transmitter combines modulator and emitter technology into a single operating unit, which  
reduces operating cost and eliminates precious rack space. The TX90 transmitter produces a wide-angle infrared sig-  
nal that concentrates the IR energy efficiently in the listening area. Operating on the 2.3-3.8 MHz bandwidth, the  
TX90 is less susceptible to radio and lighting interference. Each TX90 transmitter can cover up to 28,000 sq ft (2,600  
sq m) in single-channel operation. The coverage area can be easily increased by connecting additional TX9 emitters.  
A wall/ceiling omnidirectional mount is included, and stand kits are available for portable operation.  
Applications:  
Cinemas • Simultaneous Interpretation • Audio Description • Conferences • Multi-Media Rooms  
Boardrooms • Courtrooms • Schools • Universities • Churches  
WIR TX90 Transmitter:  
Dimensions, Weight:  
Color:  
11.25" W x 6.25" H x 2.125" D (28.6 cm x 15.9 cm x 5.4 cm), 1.8 lbs (0.8 kg)  
Black with white legends, black acrylic lens  
Power Supply:  
Wall Transformer, 24 VAC, 50-60 Hz, 35 VA, 3-pin MOLEX Connector  
North America:  
Europe:  
UK:  
TFP 010, UL/CSA  
TFP 027-01, 2-pin Schuko plug, CE  
TFP 027-02, 3-pin UK plug, CE  
Power Cable:  
Modulation:  
Carrier Frequency:  
NEC Class 2 wiring, two-conductor, 18 ga., 200’ (61m) max. length  
FM Wideband, +50kHz deviation max., 50uS pre-emphasis  
Channel A: Selectable, 2.3/2.8 MHz,  
Channel B: Selectable, 3.3/3.8 MHz  
Emitter IR Power:  
Coverage Area:  
3.5 watts  
28,000 ft2 (2,600 m2) in single-channel mode when using the RX22-4 Receiver  
18,000 ft2 (1,670 m2) in four-channel mode when using the RX22-4 Receiver  
3,500 ft2 (325 m2) in single-channel mode when using the RX14-2 Receiver  
3,063 ft2 (285 m2) in single-channel mode when using the RX16 Receiver  
(See coverage area diagrams)  
Signal-to-Noise Ratio:  
Frequency Response:  
Total Harmonic Distortion:  
Compression:  
>75 dB, +3dB  
80 to 15,000 Hz, electrical response  
Less than .2%, electrical response at 1kHz  
Music preset 1:1, Voice preset 1.5:1, Hearing Assist preset 2:1  
20 minute timer shuts off carrier when no audio is present  
Auto Carrier Shut-Off:  
Fig. 1: TX90 Bottom View:  
Power Indicator:  
Red LED  
Audio Volume Level Controls:  
Audio Indicators:  
Carrier LEDs:  
CHA and CHB Input Level, press to select, 28 dB adjustable range  
CHA and CHB Audio Level, yellow LED, flash  
2 green LED carrier “on” indicators  
Phones Output:  
Application Preset:  
3.5mm TRS headphone jack. CH A tip, CH B ring on jack, 32 ohm headphone (min)  
Music, Voice, Hearing Assist. Frequency response; Music: Flat; Voice: Mid-range  
boost; Hearing Assist: High frequency boost  
Tone Control:  
Press to select, 21 dB adjustable range (1 kHz between low boost/hi-cut and low  
cut/hi boost).  
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!  
* 90 days on accessories.  
©2008, Williams Sound Corp. MCAT 064A  
1
 
SoundPlus® Infrared System • Model WIR SYS 90V  
D
D
Fig. 3: Receiver Coverage Area with TX90 Transmitter in Single Channel Mode  
90  
80  
Feet  
Receiver Coverage Area with TX90  
Transmitter in Single Channel Mode  
70  
60  
RX22-4 Receiver  
RX14-2 Receiver  
RX16 Receiver  
50  
40  
30  
20  
10  
0
RX16  
RX14-2  
RX22-4  
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-80  
-90  
0
90 100 110 120 130 140 150 160  
10 20 30 40 50 60 70 80  
Feet  
The coverage area for the TX90 will vary depending on the receiver being used. The diagram  
above demonstrates the receiver coverage when operating a single TX90 transmitter in single chan-  
nel mode. Patterns are direct radiation patterns.  
Note: Reflections of the infrared light from walls, ceilings and floors may change these patterns.  
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!  
©2008, Williams Sound Corp. MCAT 064A  
3
 
SoundPlus® Infrared System • Model WIR SYS 90V  
D
D
Fig. 4: 3-Dimension Foot Pattern  
The TX90 floods the listening audience with a  
cone shape light pattern as shown here.  
The path of the cone shape light leaves a  
pattern on the ground, or "foot print, " and  
indicates where the strongest receiver  
reception will occur.  
The actual coverage area will vary depending  
on the sensitivity of the receiver being used.  
Refer to Figures 3 and 6 to determine how  
many emitters are required for 100% coverage  
of the listening area.  
To determine the best location for the transmitter, it helps to think of the IR transmitter as an invisible  
floodlight. You’ll want to aim it so the listeners are “flooded” with the infrared light. The transmitter  
should also be positioned high enough so it won’t be blocked by people and other physical obstructions.  
See Figure 5 below. Mount the transmitter at least 2 ft. (.61 m) above the audience. Position the transmitter  
to face in a slightly downward angle, 20°, that will increase the “throw” of the infrared beam.  
Fig. 5: Vertical Beam Spread  
Minimum Receiver Range When Operating with a TX90 Transmitter in Single Channel Mode  
RX22-4 Receiver:  
150' (45 m)  
RX14-2: 80' (24 m)  
RX16: 70' (21 m)  
(Range)  
TX90  
30'  
SCREEN  
STAGE  
6'  
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!  
©2008, Williams Sound Corp. MCAT 064A  
4
 
SoundPlus® Infrared System • Model WIR SYS 90V  
D
D
Maximum Range When Using the RX22-4 Infrared Receiver  
Fig. 6: Horizontal and Vertical Radiation Polar Plots  
HORIZONTAL RADIATION POLAR PATTERNS  
VERTICAL RADIATION POLAR PATTERNS  
DISTANCE FROM EMITTER TO 1 nW/sq cm CONTOUR  
DISTANCE FROM EMITTER TO 1 nW/sq cm CONTOUR  
– 90  
– 80  
– 90  
– 80  
60  
60  
200  
200  
– 70  
– 70  
– 60  
– 60  
54  
48  
42  
36  
30  
24  
18  
12  
6
54  
48  
42  
36  
30  
24  
18  
12  
6
180  
160  
140  
120  
100  
80  
180  
160  
140  
120  
100  
80  
– 50  
– 50  
– 40  
– 40  
– 30  
– 30  
– 20  
– 20  
60  
60  
40  
40  
– 10  
– 10  
20  
20  
0
0
10  
10  
20  
20  
30  
30  
40  
40  
50  
50  
60  
60  
70  
70  
80  
80  
90  
90  
1 Channel, 1 nW/sq cm  
(Approx. 28000 sq ft, 2600 sq m)  
1 Channel, 1 nW/sq cm  
2 Channel, 1 nW/sq cm per channel  
(Approx. 18000 sq ft, 1700 sq m)  
2 Channels, 1 nW/sq cm per channel  
4 Channel, 1 nW/sq cm per channel  
(Approx. 11000 sq ft, 1000 sq m)  
4 Channels, 1 nW/sq cm per channel  
Reflections of the infrared light from walls, ceilings, and floors may change these patterns.  
Important: Remember to point the emitter towards the listening audience!  
If you’re not getting sufficient coverage with a single, properly installed TX90 Transmitter, you may need  
to add additional WIR TX90 Transmitters to achieve full coverage of your listening area. Figures 7a and  
7b illustrate how multiple emitters can be used for large room installations.  
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!  
©2008, Williams Sound Corp. MCAT 064A  
5
 
SoundPlus® Infrared System • Model WIR SYS 90V  
D
D
Multiple Emitters Installed to Maximize Coverage  
Fig. 7a: Overlapping Illumination Patterns to Cover Larger Listening Areas  
TX9  
TX9  
TX9  
TX9  
Fig. 7a above is a typical example of how multiple emitters are used to cover larger listening areas.  
Generally it is desirable for the illumination patterns to overlap. Note: The coverage area will vary depend-  
ing on the infrared receiver being used; refer to Figures 3 and 6 to determine how many emitters are  
required to achieve full coverage of a listening area.  
Fig. 7b: Overlapping Illumination Patterns to Cover Larger Listening Areas  
Coverage Area  
with Single  
Transmitter  
TX90  
TX9  
Coverage Area  
with Second Emitter  
Added to Same  
Emission Point  
(50% increase)  
When a TX90 transmitter and TX9 emitter are used at the same emission point in single channel mode, the  
overall coverage area increases 50%. When using an RX22-4 receiver, as a result, the coverage area will  
increase to an estimated 42,000 ft2 (3,902 m2); the RX14-2 will increase to 5,250 ft2 (488 m2); the RX16 will  
increase to 4,590 ft2 (426 m2).  
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!  
©2008, Williams Sound Corp. MCAT 064A  
6
 
SoundPlus® Infrared System • Model WIR SYS 90V  
D
D
WIR RX22-4 Receiver:  
Fig. 8: WIR RX22-4 Receiver  
Receiver Style:  
Size:  
Body-Pack, dual-lens detector, lanyard  
4.5" L x 2.85" W x 1.2" H (114.3 mm x 72.4 mm x  
30.4 mm)  
4.6 oz (130 g) with batteries  
Black  
3 ft (.91 m), allows receiver to be worn around the neck  
-10° C to +50° C  
2 x AA, alkaline (BAT 001) or NiMH (BAT 026)  
Alkaline: 60 hours, NiMH: 30 hours/charge  
25 mA, nominal  
Channel  
Selector Knob  
Earphone  
Jack  
Weight:  
Color and Material:  
Lanyard:  
Operating Temperature:  
Battery Type:  
Battery Life:  
Battery Drain:  
Charging Contacts:  
Carrier Frequency:  
OFF  
"On"  
On/Off  
Indicator LED Volume Switch  
For use only with CHG 3512  
RX22-4 Top  
Channel 1: 2.3 MHz, Channel 2: 2.8 MHz  
Channel 3: 3.3 MHz, Channel 4: 3.8 MHz  
50 uS  
De-Emphasis:  
FM Deviation:  
50 kHz  
Signal-to-Noise Ratio:  
Squelch:  
Frequency Response:  
Total Harmonic Distortion:  
Controls:  
60dB min.  
Receiver squelches (mutes) at 40 dB S/N ratio  
25 Hz to 16 KHz, +1 dB, -3 dB, electrical response  
Less than 1%, electrical response  
ON/OFF/VOLUME: combination thumbwheel knob  
Channel Selector: four-position rotary switch  
Red LED “ON” indicator, flashes to indicate Low battery  
3.5 mm stereo mini phone jack  
Accepts 3.5 mm mono or stereo phone plug  
15 mW max at 32 Ω  
Indicators:  
Audio Output Jacks:  
Audio Output Power:  
Acoustic Output:  
Sensitivity:  
110 dB SSPL90 w/ EAR 013  
Better than 1 nW/cm2 for 40 dB signal-to-noise ratio  
CE, FCC, RoHS, WEEE  
Approvals:  
Warranty:  
5 years on receiver, 90 days on accessories  
Compatible Headphones/Earphones: Mono or stereo, 8-32 ohms, 3.5 mm mini phone plug,  
HED 021, HED 026, EAR 013, EAR 014, EAR 022, NKL 001  
RX22-4 Front  
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!  
©2008, Williams Sound Corp. MCAT 064A  
7
 
SoundPlus® Infrared System • Model WIR SYS 90V  
D
D
WIR RX14-2 Receiver  
Receiver Style:  
Earpad Size:  
Weight:  
Color and Material:  
Operating Range:  
Battery Type:  
Battery Life:  
Battery Drain:  
Controls:  
Headset  
2.5" (6.5 cm) diameter, adjustable headband  
6.7 oz (191 g) without batteries  
Black, plastic  
Up to 3,500 ft2 (325 m2) when using a single WIR TX90 Transmitter  
AAA Alkaline batteries (BAT 010)  
Alkaline: 50 hours  
25 mA, nominal  
ON/OFF switch  
(2) Thumbwheel volume control knob, left and right  
(1) Frequency push-button selector, 2.3 MHz or 2.8 MHz  
118 dB MAX SSPL90, +/- dB with 6 cc coupler  
1-year warranty (excludes physical damage)  
CE, RoHS  
Acoustic Output:  
Warranty:  
Approvals:  
Fig 9: WIR RX14-2 Side View  
Right Earphone  
Left Earphone  
Infrared "Eye"  
Infrared "Eye"  
AAA  
Battery  
Compartment  
AAA  
Battery  
Compartment  
Frequency  
Selector: 2.3 MHz  
or 2.8 MHz  
On/Off  
+
+
Volume  
Volume  
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!  
©2008, Williams Sound Corp. MCAT 064A  
8
 
SoundPlus® Infrared System • Model WIR SYS 90V  
D
D
Bid Specs  
WIR TX90 Transmitter  
The Williams Sound Corp. WIR TX90 transmitter shall consist of an all-in-one modulator and emitter operating on switchable  
carrier frequencies of 2.3/2.8 MHz or 3.3/3.8 MHz. The carrier frequency shall use 50 kHz deviation and 50µs pre-emphasis.  
The transmitter shall have a range of 28,000 ft2 (2,600 m2) in single channel mode when using the RX22-4 receiver. The trans-  
mitter shall be contained in a metal housing with a durable plastic lens. The transmitter shall be convection cooled without  
fans. The transmitter shall include an omni-directional mounting bracket for permanent installations. Additional brackets  
shall be available for different mounting options.  
The transmitter shall provide two channels of selectable carrier frequencies: CH A 2.3/2.8 MHz or CH B 3.3/3.8 MHz. Two trans-  
mitters used in tandem shall provide up 4 simultaneous channels.  
The transmitter shall have two Phoenix connectors on the back for balanced or unbalanced line input. All controls and indi-  
cators shall be accessible on the bottom of the panel of the transmitter.  
The transmitter shall have three application presets: Music, Hearing Assistance and Voice accessible by thumbscrew adjuster.  
There shall be a 3.5mm stereo headphone jack for monitoring the processed audio before being transmitted.  
Two BNC (50Ω) baseband output jacks shall be provided on the back panel for more coverage needs. The TX9 emitter panels  
must be used with the TX90 transmitter via RG58 coax cable.  
The transmitter shall be powered by an external 24VAC, 50-60 Hz, 35VA power supply. The power connector shall be a three  
pin Molex type. Additional emitters shall require individual external power supplies.  
The transmitter shall be covered by a five-year warranty on parts and labor. The transmitter shall be the Williams Sound Corp.  
model WIR TX90  
WIR RX22-4 Receiver  
The receiver shall be a body-pack type with IR detector lens behind face of the unit. The unit shall have a lanyard for hands-  
free operation. The receiver shall have a rotary-type volume control. The receiver shall operate for 60 hours with two AA  
alkaline batteries and for 30 hours per charge with NiMH AA batteries. The receiver shall be charged without battery  
removal via charger contacts in the case. A drop-in charger accessory shall recharge the batteries in 8 hours when used with  
CHG 3512 charger. The receiver shall be housed in an impact resistant plastic case with a hinged battery door that does not  
separate from the receiver. The receiver shall receive 2.3 MHz, 2.8 MHz, 3.3 MHz or 3.8 MHz modulated IR signals with 50 µS  
de-emphasis. The receiver shall have a 3.5 mm stereo phone jack and accommodate low-impedance mono or stereo ear-  
phones and headphones. The receiver shall accommodate neckloop telecoil couplers. The receivers shall provide 110 dB  
SSPL90 output with EAR 013 earbud-type earphone.  
The system electrical frequency response shall be 25 Hz to 16 kHz, +1, -3 dB and the signal-to-noise ratio shall be 60 dB. The  
receiver shall have CE, FCC, RoHS, and WEEE approval. The receiver shall be covered by a five-year parts and labor warranty,  
excluding earphones, headphones, batteries and chargers.  
The receiver shall be the Williams Sound Corp. model WIR RX22-4.  
WIR RX14-2 Receiver  
The receiver shall be a headset style with IR detectors positioned on top of each individual earphone. The receiver shall  
operate on 2.3 MHz or 2.8 MHz frequency. The receiver shall have an individual rotary-type volume control on each individ-  
ual earphone and a on/off selection switch on the right earphone. The receiver shall have a push button frequency selector  
to choose between 2.3 MHz or 2.8 MHz operation. The receiver shall provide 118 dB SSPL90 output, +/- 1 dB, and a signal-  
to-noise ratio of 58 dB. The receiver shall operate up to 50 hours when using AAA alkaline non-rechargeable batteries. The  
receiver shall be encased in a black, plastic case. The receiver shall operate up to 3,500 ft2 (325 m2) when using a single WIR  
TX9 Emitter. The receiver shall have CE, RoHS, and WEEE approval and be covered by a one-year parts and labor warranty,  
not including batteries or accessories.  
The receiver shall be the Williams Sound Corp. model WIR RX14-2.  
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!  
©2008, Williams Sound Corp. MCAT 064A  
9
 
SoundPlus® Infrared System • Model WIR SYS 90V  
D
D
Contact:  
United States  
Williams Sound Corp.  
10321 W. 70th Street  
Eden Prairie, MN 55344  
Phone: 800-328-6190 or 952-943-2252  
Fax: 952-943-2174  
Canada  
Thorvin Electronics  
2861 Sherwood Heights Dr. Units 36-37  
Oakville, ON L6J-7K1 Canada  
Phone: 800-323-6634 or 905-829-3040  
Fax: 905-829-4196  
United Kingdom  
Sound Associates  
Keeble House, 81 Island Farm Road  
West Molesey, Surrey KT 2SA  
United Kingdom  
Phone: (44) 020 8939 5900  
Fax: (44) 020 8939 5901  
Asia, Australia, Europe, Latin America, South America, South Africa  
International Sales Department  
Williams Sound Corp.  
10321 W. 70th Street  
Eden Prairie, MN 55344 USA  
Phone: +1 952 224 7791  
Fax: +1 952 943 2174  
NOTE: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!  
©2008, Williams Sound Corp. MCAT 064A  
10  
 

Weed Eater Trimmer 530087877 User Manual
Weider Home Gym 831159821 User Manual
Western Digital Computer Drive Home Edition User Manual
Whirlpool Dryer Accessories 8543738B User Manual
Whirlpool Refrigerator W9RXXMFW User Manual
Whistler Radar Detector XTR 220 User Manual
Wolf Griddle ASA Series User Manual
Xantrex Technology Portable Generator power Inverter Stacking User Manual
Yamaha Drums DD 10 User Manual
Zanussi Cooktop ZKC5020 User Manual